Product Categories

Social  Media

 

Home > KNOWLEDGE > Content
Precautions for the use of leadscrew diamond wheel
- Dec 13, 2016 -

①, the device after the roller shaft step radial runout can not exceed 4um. Do not give a strong impact roller.

②, in the wheel and wheel contact do not press the driver installed ON, OFF button, we can only be separated to start or stop. And drive the installation of local attention can not turn into stolen goods.

③, diamond dressing rollers and mandrel with the gap should be as small as possible, we recommend is not greater than 0.004mm, so as to avoid vibration.

④, before the dressing, the wheel and the wheel must be cooled with coolant for a certain period of time, the cooling fluid flow rate and pressure should be grinding wheel grinding and equal. Dressing and grinding wheel contact with a lot of coolant injection.