Product Categories

Social  Media

 

Home > NEWS > Content
Precautions For Using The Rear Axle Diamond Dressing Roller
- Dec 13, 2016 -

After the bridgehead diamond wheel dresser for bridgehead surface grinder, automatic surface grinder, thread grinder, NC automatic grinding machine, a few days ago we look at the bridge after the use of diamond dressing wheel, Bridge diamond forming dressing roller when what precautions:

  1. Do not give a strong impact roller.

  2. The radial runout of the rear roller shaft step can not exceed 4um.

  3. Do not press ON or OFF button on the wheel and roller contact, we can only start or stop when the wheel is separated.

  4. Dressing and grinding wheel contact with a lot of coolant injection.

  5. drive the installation of the local attention can not turn into stolen goods.

  6. Diamond dressing roller with the core shaft with the gap should be as small as possible, we recommend is not greater than 0.004mm, so as to avoid vibration.

  7. Before dressing, you must cool the wheel and grinding wheel with coolant for a certain period of time, the cooling fluid flow rate and pressure should be equal to grinding wheel grinding.